Wire & Netting

Wire and Netting

1/1

Netting

X™ fence® Stock Fence XHT8-80-30

An unobtrusive smooth surface X knot greatly reduces the risk of fleece removal or hide damage, this is the most common mesh pattern used in the UK, ideal for most types of livestock.

BENEFITS

• Superior alu/zinc coated wire, lasts 3-4 longer than galvanised wire

• 450mm pre-stripped ends more than most

• Premium primary wires only used in Xfence fabricated netting

• Consistent superior high tensile strength wires only

• Greater rigidity due to the one-piece vertical wires

• Smoother and safer non-abrasive forged X knot

• Proven in the field since its conception in 2007

• Easier to install, almost self-supporting

• Save on both labour and posts

• Longer maintenance free life

• Guaranteed to last

• Made in New Zealand by the specialists in high tensile fencing

X-Fence Wire Netting Rolls Clipex Triple x

X-Fence Spec

Stock fencing

Benefits of mild steel hinge joint:

• Cost effective- conventional, durable fencing solution

• Flexibility- hinge design and mild steel make it easier to work and install

• Suitable for permanent livestock fencing – sheep. cattle and pigs, dogs etc.

• Tension curves between the vertical wires aid climatic change, tensioning and stock pressure.

• Eco friendly-100% recyclable Benefits of high tensile hinge joint

• Spring like properties – flexible under stock pressure, resistant to stretching

• Stronger – Fewer intermediates posts are required due to the strength of the wire

Handy rolls of wire netting

Galvanised Wire Netting 10m Rolls &

Green PVC Coated Wire Netting 10m Rolls

Ideal for poultry runs and enclosures, aviary and bird cages, crop guards, rabbit proofing and general purpose fencing

Galvanised Welded Mesh 6m Rolls

Ideal for using in pet cages or runs

Green PVC Coated Garden Fence 10m Rolls

Ideal for all applications around the garden

Mild Steel Galvanised Wire 500g Coils

Ideal for use around the garden and general fencing work, available in various gauges.

Wire

High tensile line wire on handy to use bobbins

Bobbin size - 260mm dia x 200mm deep
Easy to handle and carry reels
Tensile strength : 1235 -1390 (N/mm2)
Coating weight : min 240g/m2
Wire diameter tolerance : +/-0.04(mm)
Alu/Zinc coating to BSEN 10244-2 Class A

These will give you a high strength fence/support wire with minimal maintenance. A smooth heavily galvanised wire, which features single-strand design that allows it to be used for cost efficient fencing for numerous applications. With minimal appearance it is ideally suited to sensitive areas where visibility is kept to a minimum.

Ideal for permanent electric fencing, plant support, simple line wire fencing systems, ideal for flood areas (allows debris to flow through). An effective demarcation or guide line. Supplied in ‘The Reel Wire’ bobbins for easier handling in 650m roll at 25kg

High Tensile Line Wire

High tensile line wire for a wide range of fencing uses
Available in stock in 2.50mm
Heavily galvanised for a long life

This wire makes an effective barrier for livestock and strong support for plants and netting. The elasticity of high tensile line wire means that any pressure applied to the wire will spring back once the pressure is released. 2.0mm and 2.5mm are also used in electric fencing, offering a strong long lasting conductive fence.

Barbed wire

• Barbed wire is commonly used for livestock containment but can also be used as a security deterrent (check laws before erecting).

• High tensile barbed wire retains its elasticity once erected. The tensile strength is stronger than mild barbed wire which allows it to be produced from thinner wire.

• Running barbed wire above your fence will prevent livestock pressure, running a base line will prevent burrowing livestock such as pigs.

• Supplied on wooden reels for ease of use and disposal.

Alu/Zinc 2.0mm dia - 1050-1250 N/mm²

1.9mm dia - 440-540 N/mm²

600kgs 2x2mm line wires 200m F2015

Staples

Barbed 40mm Staples in 20kg bucket

Standard 40mm Staples in 2.5kg & 25kg boxes

Milwaukee collated barbed 40mm Staples to fit the Milwaukee M18 FFUS Fencing Stapler

Gripple Plus Joiner

The Gripple Plus range of wire joiners and tensioners is suitable for all fencing applications.

Features/Benefits

Join and tension in one.
Eliminates tying and knotting wires, reducing installation time.
Ideal for use on high tensile and milk steel wire.
Designed for high loaf holding and corrosion resistance.
Easily re-tensioned year-after-year.

Gripple High Tensile

Barbed Joiner

The Barbed High Tensile joiner has been intentionally designed to grip the unique shape of barbed wire. It is fast to install, simple to use, and thanks to the new corrosion resistant ceramic wedge, you can walk away with confidence your wire joint will last as long as your fence.

Features/Benefits

Easy to install – Join or repair high tensile barbed wire in seconds with audible engagement for added confidence
Compatible – Use with 1.57mm to 2mm wire
Stronger than a traditional knot – up to 16% stronger than a traditional wire knot
Long lasting – Made from corrosion resistant materials, designed to outlast your fence
Designed for high tensile wire – New patented technology specifically designed for use with high tensile barbed wire.

Gripple T-Clip Joiner

The gripple T-Clip securely fastens fencing wire at an end post. Easily installed without the need to tie or knot wire. An invaluable fixing when using small meshed pattern wire such as otter, poultry or horse fences especially at ground level.

Features/Benefits

Eliminates tying and knotting wires, reducing installation time.
No need to cut and remove vertical wire.
The twist on action provides a secure termination.
High grade ceramic roller for corrosion resistance.

Back Fencing & Wire